藍曲900
產品說明：
本品系采用優質的EVA乳液、熱塑性彈性體、增粘樹脂、多種助
劑，經過嚴格的科學實驗和先進的生產工藝精心制作而成的一種
高性能粘膠。
外 觀：乳白色粘稠狀液體。
適用范圍：
本品適宜于紙/紙、膜/紙、UV強力粘接，也適用于精品盒中紙、
膜、中密度板之間的合面與粘接。
產品特性：
1、涂刷性能好，干燥速度較快。
2、膠膜柔韌，對覆膜面的附著性好，粘接強度大。
3、抗冷耐熱性能佳，粘合好的產品在60℃烘烤72小時或-20℃
冷凍72小時粘接強度保持不變，產品不爆，膠膜不發脆。
施工方法：機糊通用膠。
注意事項：
1、對施膠后要求稍做晾置，晾置時間視被粘接件厚薄和氣溫
情況而定，一般為2-6分鐘。
2、對于挺度太大的產品，粘合后要求至少壓榨半小時，并且
壓力要足夠，使兩被粘面能夠充分貼合。
3、使用本品的產品質量涉及諸多因素，用戶應在使用前視產
品的具體情況進行試用，合格后方可批量生產。
貯存運輸：
1、本品應密封存放于陰涼干燥通風處，貯存溫度為5-35℃為
宜，有效貯存期為半年，超過貯存期如檢驗合格仍可使用。
2、本品為水分散體，屬于非危險品，可按普通物品辦理運輸。
免責條款：
由于貨品的使用、操作、貯存以及運輸?shù)染皇鼙竟静倏兀?
本公司對貨品的使用性能、效果及適用性均不負責。本公司的
任何職員或代表均無權改動或放棄本條款，如貴公司未能接受
此項免責條款，請將貨品原裝退回。
Product Description:This product is made of high-quality EVA lotion, thermoplastic elastomer, tackifying resin and various additives
Agent, which is elaborately made through strict scientific experiments and advanced production technology
High performance viscose.
Appearance: milky white viscous liquid.
Scope of application:
This product is suitable for paper / paper, film / paper, UV strong adhesive, and also suitable for paper in boutique boxes
Bonding and bonding between film and MDF.
Product characteristics:
1. Good brushing performance and fast drying speed.
2. The adhesive film is flexible, with good adhesion to the coated surface and high adhesive strength.
3. Good cold and heat resistance. The products with good adhesion are baked at 60 ℃ for 72 hours or - 20 ℃
After 72 hours of freezing, the adhesive strength remains unchanged, the product does not explode, and the adhesive film is not brittle.
Construction method: machine paste general glue.
matters needing attention:
1. After sizing, it is required to air slightly, and the time depends on the thickness of the bonded parts and the temperature
Depending on the situation, generally 2-6 minutes.
2. For products with too large stiffness, it is required to press for at least half an hour after bonding, and
The pressure shall be sufficient to make the two bonded surfaces fully fit.
3. The product quality of this product involves many factors. The user should inspect the product before use
Trial use shall be carried out according to the specific conditions of the products, and batch production can be carried out only after they are qualified.
Storage and transportation:
1. This product should be stored in a cool, dry and ventilated place with a storage temperature of 5-35 ℃
It is advisable that the effective storage period is half a year. If the storage period is exceeded, it can still be used.
2. This product is an aqueous dispersion and belongs to non dangerous goods. It can be transported as ordinary goods.
Disclaimer:
Since the use, operation, storage and transportation of goods are not controlled by the company,
The company is not responsible for the performance, effect and applicability of the goods. Of the company
No employee or representative has the right to change or waive these terms and conditions, if your company fails to accept them
For this exemption, please return the original goods.